New Pro Firmware r3.8.24-R-1531355-PROD-1 for router and extenders.

[tnj]

This morning there is new Pro router firmware r3.8.24-R-1531355-PROD-1 and it starts by saying use HTTPS which is then says is not available. It then requires the admin password to get into any level of access. Now testing out what it does.

It allows you to set your own DNS servers in DHCP.

It still does not let you lock the 2.4G WiFi to a channel, it keeps reverting to Channel 11

[JimM11]

@PortableFrank Sounds like you have a wi-fi device on the network that may not be playing nicely once that Pro is upgraded to the latest FW, would be an idea to switch all of them off, and bring onstream one at a time with an extended time between to see if your upload works as expected! May also be an Ethernet connection especially if you have a sky Q box connected! 

[Bullstein]

Is this post, and the subsequent reporting of errors in relation to the white wifi 7 Pro hub or the black Smart hub plus?

i was thinking if upgrading to the white Pro wifi 7 with wifi Plus but if its the nightmare experienced by other users here i will stick with the functioning setup i already have 

[XRaySpeX]

@Bullstein : This thread is in relation to & is entitled "New Pro Firmware r3.8.24-R-1531355-PROD-1 for router and extenders". That is the white router!

---

@Bullstein wrote:

upgrading to the white Pro wifi 7 with wifi Plus 

---

The EE Smart WiFi Plus doesn't go with the white EE Smart Hub Pro.

[Bullstein]

I know, I was thinking of upgrading to the smart hub plus. Wifi 7 hub

[XRaySpeX]

@Bullstein : I'm not sure you do know. The Smart Hub Plus is WiFi6, not WiFi7!

[JimM11]

@Bullstein Here is the link to the current spec's for the EE Routers linked below!

https://ee.co.uk/help/broadband/getting-started/compare-our-range-of-broadband-hubs

[PortableFrank]

No WiFi devices connected, sadly! I turned WiFi off entirely and just had my laptop connected to the hub via ethernet - good suggestion though!