cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Unacceptable Broadband Installation ONT

Fahmed07
Investigator
Investigator

Today I had my broadband installed and an engineer came out. I asked for the ONT to be placed in a specific location, but he said he couldn’t install it there because the fibre optic cable isn’t able to bend like my previous provider’s. I don’t understand this, as my hallway is quite straight and it would only have needed to go around a door frame.

Instead, he drilled through to the outside alleyway and installed everything behind my sofas in the front room. As a result, the room I work from at the back of the house now has no connection at all.

On top of that, all the cables and the router have been left on the floor in a corner, which feels unsafe with children and a cat in the house.

 

I don’t understand why my original request couldn’t be followed

IMG_F027451D-BEC3-486A-9042-714D022FC69C.jpeg

 

was it simply because it would have taken longer?

1 SOLUTION

Accepted Solutions
Leanne_T
EE Community Support Team

Hi there @Fahmed07 

Thanks for coming to the community. 

If you would like to discuss the installation, please get in touch with our broadband tech guides and they will get this looked into for you. 

Leanne.

View solution in original post

7 REPLIES 7
Mustrum
EE Community Star
EE Community Star

@Fahmed07   It is your responsibility for internal cabling, and to provide spmewhere for the router. As explained by the engineer, Fibre has limitations and cannot be bent 90 degrees to go around door frames.

Most engineers will do their best to accomodate customer requirements, but they do have to be practical and within reason. The router is connected via an ethernet cable so can be placed up to 100m away from the ONT, so you could run an ethernet cable to your other room or use wireless.

Chris_B
EE Community Star
EE Community Star

@Fahmed07  Was your previous supplier using a fibre optic cable or was it a wire ? Fibre optics cables are glass and have a larger cornering angle than a wire as they can break, they can’t do 90 degree bends. So round a door frame is a no go unless you curve it round the door frame.  

no

IMG_0553.jpeg

 

 

Yes 

 

IMG_0554.jpeg

 but this wouldn’t fit around a door frame as the frame is square. 

To contact EE Customer Services dial 150 From your EE mobile or 07953 966 150 from any other phone.

They had fibre optic cables but when it went through the door frame it wasn’t at an 90 degree angle it was more curved. As you can see in photos. 

IMG_364F2745-7C21-4CE5-BA7A-27A65825C379.jpeg

 

IMG_6803.jpeg

 

Leanne_T
EE Community Support Team

Hi there @Fahmed07 

Thanks for coming to the community. 

If you would like to discuss the installation, please get in touch with our broadband tech guides and they will get this looked into for you. 

Leanne.

Rw604
Visitor
  • This is how the installer left our today 

my wife the engineer wasn’t as good as open reach who ran the cable to our home very professional 

att.sH3WVu74CiGiF1-JJHa0IfSMEaNRWhJ-jGrXniOA3Sc.jpeg

 

att.h9FdZ0Og8RiCw8IhIK-0dm66TqKcZ4OUOcfZZZDP9j4.jpeg

 

@Rw604 Is you complaint about the External or the Internal position now for the EE Hub?

Hi @Rw604 

Is this affecting the connectivity around the property? Mine was left at one end of the house, behind some large furniture, and it affected the connection to my home office, which was really frustrating.

With having kids in the house as well, I also found it quite dangerous having cables exposed and running across the floor.

If you’re not happy with the setup, I’d reach out to the broadband technical team and ask if they can arrange for Openreach to come out and relocate it to a more suitable position.