18-09-2025 07:52 AM - edited 18-09-2025 08:42 AM
This morning there is new Pro router firmware r3.8.24-R-1531355-PROD-1 and it starts by saying use HTTPS which is then says is not available. It then requires the admin password to get into any level of access. Now testing out what it does.
It allows you to set your own DNS servers in DHCP.
It still does not let you lock the 2.4G WiFi to a channel, it keeps reverting to Channel 11
02-10-2025 04:35 PM
Yip , me 😁. I bought mine off eBay and it's updated fine last night 👍
02-10-2025 04:49 PM
@mikefairgrieve Does your EE app show a Smart Hub Plus still?
02-10-2025 05:40 PM
02-10-2025 08:43 PM
Unfortunately yes still shows the Plus instead of the Pro in the app.
02-10-2025 10:18 PM
My app has always shown the pro with the correct image even on older firmware versions.
Anyway there may be a way out, in our village in our street OFNL were pulling fibre into the ducts, so hopefully an alternative to Openreach and Virgin.
03-10-2025 05:42 AM
Did you get yours from EE or 3rd party?
03-10-2025 07:18 AM
I thought that it was all down to what router EE have you down for on their system.
03-10-2025 07:18 AM
I got my pro router and initial extenders from EE and bought some more extenders from a third party as EE would not supply any more. All have updated their firmware.
03-10-2025 07:50 AM
Must be yeah
04-10-2025 12:30 PM - edited 04-10-2025 12:31 PM
Hi, has anybody else still not had their Smart Hub Pro updated yet? I'm still on r2.64.7-R-1303938-PROD-1
I also bought mine from Ebay.