pfSense (or own router) and Vigor 130 ADSL modem

[MickeMannen]

Hi All

I used to have a lot of issues with latency when using my own router and the Vigor 130 ADSL modem. After some checking i got it working (so far no issues at all and online gaming works perfectly).

I assume that you know how to set up your own router etc.

For settings on the Vigor 130 modem please see these pictures - i believe the key was MTU 1492.

 Default username and password is admin/admin at 192.168.2.1

Good Luck!

//Micke

[Mustrum]

Your title and text talks about ADSL, yet the modem seems to be set for VDSL.

[XRaySpeX]

The DrayTek Vigor 130 is a ADSL2+/VDSL Modem.

The Key setting on any Fibre modem is VLAN ID or Tag = 101.

[MickeMannen]

Correct - in my world it is the same slow solution!

[Mustrum]

But the settings are different for ADSL and VDSL, so not sure what point your post is trying to make.

[MickeMannen]

Hi!

My point was to help others with the same issues that i used to have. The default settings of the DrayTek Vigor 130 VDSL modem gave me low latency from time to time (every 15min to 30 min). When i did the update this was solved!

Unfortunately I can't update the header for the first post or even remove it.

[DSL3MZP]

I have the same setup but can’t get an ip address in pfsense. Any advice on what settings you used in pfsense to get this working?

[MickeMannen]

Hi!

Still a problem? Reply here and i will try to guide you

//Micke

[DSL3MZP]

Hi Micke,

would love some help if you have the time and knowledge!

Regards

Matt