26-12-2025 06:30 PM
Hi
I was with BT broadband for many years with no problems and recently joined EE fibre min 700. In doing so EE had to upgrade the cable from the box up the street to my house. The cable installation took many more hours than expected as there was a blockages in the ducting. Prior to EE Youfibre tried to install a cable but abandoned the installation and identified where the blockage in the ducting which was located at a junction leading from the footpath to my property that needed digging up.
EE gave it a go to get the cable installation and eventually succeeded. Ever since I’ve been connected up to EE broadband my connection has varied from excellent to poor. I’ve been in touch with EE on many occasions and they have sent an engineering out who just reset the system which seems to fix it for a short time then the faults start to returns. The faults vary as some are as follows
1) the iPhones/ iPads will have a poor WiFi connection to broadband but a good connect to router. So when you open say Sky news, Facebook, instagram the page opens but will not scroll any further past the first or second page.
2) when at home my iphones is connected to the WiFi broadband and on occasion its not able to auto reconnect to the broadband via the WiFi once I’ve been out. This is a frequent occurrence and found I have to connected to my guest broad band WiFi then back to my main broadband WiFi to get it to work.
3) PS5 has a terrible connection, always shuddering and slow. When checking the connection is confirms the router connection is good but the internet connection can be terribly slow. But if you do a speed test on the iPad it next to the PS5 states it’s 500 or more?
4) some apps will not connect at all.
5) occasionally the speed test app is not able to check the speed when the broadband is being problematic, keeps crashing out while other times is over 700/120.
It seems the iPhones etc connect to the router no problem but beyond that it’s variable.
ive done all the usual checks, switching the router of( sometimes many times during the day) the phones off, wiping and reconnecting to the WiFi which in most cases does work for a short while before the connection deteriorates.
im thinking of changing the router but I’m beginning to suspect that the cable may be the problem. Is there any way that EE can test the cable between the box and router to see it there is some damage.
EE have been helpful but do the same thing every time by resetting the broadband at their end and all is good.
Any views or thoughts would be appreciate
Solved! See the answer below or view the solution in context.
01-01-2026 01:26 PM
Yeah I know but it’s not something I suspected until now.
its now running 1627300 05/12/2025 and I had tried a full factory reset but it now proceeds directly with the automatic update before you can check the original FW factory setting.
01-01-2026 04:05 PM
@Bevas64 Nobody has posted a later version than you are on now say at least on the Forum, and not a lot of chatter about the FW version, would suggest you strip is all back connection devices one at a time, going to take a while for you to pin it down though! Turn your Guest network off, and Main on only to start!
02-01-2026 01:21 PM
An interesting development by EE.
They are not dealing with my complaint as, according to my contract, they have no guarantee relating WiFi connectivity. The speed to the hub is the only guarantee they provide. So since the WiFi doesn’t work it’s not their problem, BUT, they can sort the WiFi problem out if is upgrade my contract to a much more expensive monthly subscription. How convenient for them!!
They will not agree to cancel my contract so I’m stuck with EE with a hub that does not allow WiFi and only Ethernet connection.
obviously I’m rather annoyed and will make a formal complaint again.
its seems in my case that its a sales ploy as the EE rep kept referring to the more expensive upgrade with the WiFi guarantee being the only option to fix it.
02-01-2026 04:57 PM
Have switched WiFi off the EE hub via the hub manager.
connected a Deco AX1500 whole home mesh WiFi system. Main Deco box is connected via Ethernet to EE hub 6 plus so no outside interference. Set up the mesh and unbelievably there is no difference in performance than using the EE hub WiFi which I disabled. No streaming.
So EE hub WiFi won’t stream and third part WiFi mesh with direct Ethernet connection to the EE hub won’t stream, (that’s with EE WiFi disabled)
I am at a total loss!
03-01-2026 08:04 PM
And it goes on
Used the app to perform a factory reset. During the end of the reset when my WiFi becomes accessible the internet connection works as it should, I can stream and all the apps that didnt work were working, But several minutes later the streaming of the video literally stoped and access to the apps were also blocked.
so in conclusion once the activation of the factory reset has completed to a point where it’s allows WiFi connection ( enables full use) there must be some additional software update/ additional setting changes shortly after that happens to block the streaming and access to some apps.
surely EE can investigate!
03-01-2026 08:46 PM
@Bevas64 I honestly just don't know why you do not promote the Deco direct onto the ONT connection set up the PPPoE and password for third party and do away with the EE Smarthub+ altogether, and if the Deco can, also set it for another DNS like google or cloudflare, 8.8.8.8 or 1.1.1.1 and see how it all goes!