cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Open Reach Modem new installation

Vanishdark
Investigator
Investigator

I have a few questions about the current open reach foto installation that my flat has. 

Before ordering, I'd ask EE these three questions:

Can you activate Full Fibre 1.6 Gbps using my existing Openreach ONT?

Will you replace the existing ONT with a multi-gigabit ONT if necessary?

Does the £1.6 Gbps package include the Smart Hub 7 Pro and WiFi Extender 7 Pro, or are these additional costs?

IMG_1630.jpeg

 

IMG_1631.jpeg

 

13 REPLIES 13

@Vanishdark Opening reply go check the OR Fibre link, that will tell you what can be delivered to the home address and if you can indeed get a 1800 Mb/s connection.

Your port is yellow so it is the 1Gb/s ONT Ethernet port version and is required to be replaced by OR Openreach on conformation that you are indeed getting above the 1Gb/s speed package, that they will take care of, wither it be a Nokia or the newer Zyxel versions both work but Nokia is a direct swap and will fit in the Existing case.

There is NO package existing, the fact that the Pon light is not lit is a worry for the OR Fibre to the property. 

Hyperoptic is an altnet so you should have a separate fibre and separate ONT for them your not getting EE with that connection, and if Virgin Media Fibre (Not Cable connection on Docsis) then does give you other routes to your Broadband, VM if available is 2Gb/s symmetrical so same Up/Down speeds.

Why are you mentioning upgrading, you are not a EE/BT customer just now / presently? 

there has ben various threads stating that for 1.6 you need a new ont installed i would say that if you have had this ont since before 1.6 gig was a thing you may need to be changed

i cant see how this can be chargeable for an ont replacement i for an upgrade  would be different if you wanted the same ont moving 

think you going to have to ask customer support if this is needed to be fair but i think it would get passed ont to openreach for them to check 

@shakey19811 OR will have ALL the details for the current ONT that is installed, model/serial number etc, they control the device and it's setup on the Fibre Network, remote checking and if required to be replaced would be when/if EE are able to do the 1.6Gb/s package to the property. All that is set is the speed profile so EE clamps the throughput at there side plus any diagnostics required to get past the ONT to the EE Hub on the connection.

Vanishdark
Investigator
Investigator

Thank you all.

Booked for a new installation, an engineer will visit the property to upgrade the ONT.