cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

New EE hub has so many problems

CWDW
Visitor

Since updating my old BT hub to a new EE hub we have had nothing but issues. Television freezes with bright flash of light on screen. The new digital phones I got from BT do not seem compatible that I have had to ask they stop my phone service. 
they told me the problems outside but then they said no yjsys not the problem and say we have to have a factory reset on our hub. I wasn’t happy with this as I spent a long time connecting my appliances. 
I’m totally fed up and unless they change their useless hubs I will be going elsewhere for Internet and phone. 
they also take over 30 minutes just to answer the phone and the calls are total waste of time the staff don’t seem trained to fix issues they just guess. It’s of money each month for a poor service. 

32 REPLIES 32

@JimM11 There is a reason people invented Wi-Fi. 

I would have to go though a flight of stairs, and 4 walls to connect my TV by Ethernet.

And to answer the next question coming, the one about how strong is the wi-fi signal reported by TV, it's 4 out of 4 bars.

All I am asking is a way to report bugs in the software. Many reputable companies have such mechanisms.

@Woyteck Nothing will be forth coming question wise, you may wish to try doing as you need via EE complaints!

MarkEB
Investigator
Investigator

The EE Hub is not up to the job especially  if used with hard wired ethernet devices such as Sonos or Evohome. It uses a single CPU to manage both ethernet and WiFi. The pro uses the same architecture so likely will still have the same problems. I think the only solution is to buy a 3rd party router. 

JimM11
Community Hero
Community Hero

@MarkEB What EE Router are you using, although what you are saying how did you work that out?

Its the Smart Hub Plus. I found out with online research but the EE engineer agreed with me. Its especially bad with hubs such as Sonos and Evohome which use keepalive polling of the hub. Changing to a 3rd party hub solves the issues. I've had these hubs for years but never had a problem with other routers from other  broadband suppliers. I now have a switch between these hubs and the router which greatly improves the problem but doesn't eradicate it but does prove the point. Lastly I understand the EE hub is optimised for streaming to phones, tablets etc over WiFi and therefore can't really cope with smart home ethernet traffic. 

bobpullen
Star Contributor
Star Contributor

@MarkEB wrote:

Lastly I understand the EE hub is optimised for streaming to phones, tablets etc over WiFi and therefore can't really cope with smart home ethernet traffic. 


I'm not sure where this info is coming from but it's misguided based on my personal experience. I have 12 devices connected over Ethernet. One of those devices serves as a DNS server for my entire network, whilst another hosts a whole bunch of publicly accessible servers. I also have Home Assistant, a security alarm and a handful of IoT hubs connected over wire (e.g. Hue Hub and an Arlo security camera basestation). None of it falters 🤷

In early firmwares, the EE hubs were slow to negotiate over Ethernet and I wonder if that's what you originally saw? I think that particular issue might have since been fixed though.

Samuree
Investigator
Investigator

Just set up my reliable BT hub after spending all day trying to troubleshoot the EE super sonic one - honestly not worth it - I had about 20 smart plugs that failed to connect even after toggling to the 2 GHz setting to override the 5Ghz -

Newer isn't always better ! EE needs to come up with seamless transitioning with smart home technology - the gate keeping just didn't work in my home - so back to basics! 

XRaySpeX
EE Community Star
EE Community Star

@Samuree : Sometimes older or weaker devices may not be compatible with the default WiFi settings of EE Smart Hubs. Try setting up Compatible WiFi on the router under Advanced > Wireless Settings > Config > Compatible WiFi (it defaults to 2.4 GHz only & WPA2) & connect your problematic 2.4 GHz devices to that.

If you think I helped please feel free to hit the "Thumbs Up" button below.

To phone EE CS: Dial Freephone +44 800 079 8586 - Option 1 for Home Broadband & Home Phone or Option 2 for Mobile Phone & Mobile Broadband

ISPs: 1999: Freeserve 48K Dial-Up > 2005: Wanadoo 1 Meg BB > 2007: Orange 2 Meg BB > 2008: Orange 8 Meg LLU > 2010: Orange 16 Meg LLU > 2011: Orange 20 Meg WBC > 2014: EE 20 Meg WBC > 2020: EE 40 Meg FTTC > 2022:EE 80 Meg FTTC SoGEA > 2025 EE 150 Meg FTTP

@Samuree Similar to you and EE Smart Hub 6 + as known now, not one device failed to connect at all and i also went from a Sky Wifi 5 to an EE Wifi 6 although i did setup the EE ahead of the Activation date Mar 2024, think no more than 10 minutes after the EE was online did all it's FW updates etc, then everything connected as normal. Have done two BT Smart Hub 2's also for a user over in NI with zero problems at all on them.

My hub still drops out regularly.  The wifi signal rather than the incoming broadband. Do you have lots of WiFi devices too? This is my second hub by the way and they've both dropped out. Just haven't got round to replacing it yet.