Blink doorbell will not connect to EE hub

[TSure01]

Hello,

Any help is greatly appreciated. 

My blink doorbell camera will not connect to the EE hub. This is extremely frustrating. On the router I've disabled 5 GHz, turned off ipv6 and connected the blink sync module to the EE compatible network which is supposed to support older devices.

Nothing seems to be working. I was previously on Plusnet, my EE speed is slower than what I had on Plusnet, I'm on a 2 year contract with EE that ends in 2027.

I can't even go out and buy another doorbell camera because most support ipv4. 

I've read quite a few posts and implemented suggestions, I called EE support, no jọy. I can't believe I'm losing such a vital service because the EE hub won't pick up the camera

Thanks

[Northerner]

Hi @TSure01 

I would try in comparability mode and normally:

1. Change your WiFi SSID and password on your new router to the same as your old router. Or 
2. Remove the wifi password to see if it connects or change the password to password or something without special characters something simple 1234 purely to test if the camera connects not settings as your permanent password!

Thanks 

[TSure01]

Thanks for the speedy response. 

I don't have details of the old router, I moved to EE earlier this year. The weird thing is the blink doorbell connected ok, the battery ran down. I replaced the battery, no joy. I'm now on my 3rd new blink doorbell camera. 

I'll try the password update you mentioned to see if that makes a difference. 

Thanks again

[TSure01]

@Northerner ,

Unfortunately, suggested solution didn't work. Still not able to connect

Thanks