@brianjean13 You are somewhat going about the testing correctly, but you will need at least one other comparison at the same time, there is zero method on a EE hub to see anything reported for actual throughput as it does not support that anywhere within the hub, so you do need to setup and test two devices just incase say your Ethernet test is flawed because something else is going on background, ideally you should be able to pull up in the high figures BUT you will need just one single device connected, all your wireless wifi devices OFF the connection unless you can trust them that they are all working well.
Simple fall down, PC is a laptop Ethernet connected, it's testing and real low speed's, oops it's working on a battery only connection so the CPU is clamped down at 10%, connect the mains power adapter for it, jumps back up to 100% then speed test rocket's back up to 870Mb/s on the testing....
