topic Re: Mitsubishi Ecodan air source heat pump wifi pairing in Broadband & Landline

Mitsubishi Ecodan air source heat pump wifi pairing

SusieP3 — Fri, 12 Jan 2024 15:40:46 GMT

I moved into a new home with a Mitsubishi air source heat pump installed. I have tried to set up the Melcloud app but cannot get it to pair with my EE broadband router, and the adapter and wifi router is in the same room. I have followed the set up instructions to no avail. It seems that the App only works on a 2.4Ghz wi-fi band and needs to be IPV4 - how do I check these settings on my wi-fi router? I am not technical, so easy to follow instructions please would be welcome.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

XRaySpeX — Fri, 12 Jan 2024 16:28:26 GMT

@SusieP3 : Which router? You probably need to temporarily disable the 5 GHz band & move off the Smart channel while connecting problematic 2.4 GHz devices.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

SusieP3 — Sun, 28 Jan 2024 14:23:01 GMT

How do I access the router to check the settings please?

Re: Mitsubishi Ecodan air source heat pump wifi pairing

XRaySpeX — Sun, 28 Jan 2024 14:27:29 GMT

Again, which router? Just read the label on it.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

SusieP3 — Sun, 28 Jan 2024 14:52:10 GMT

There is no label on it - it is an EE Smart Hub. Just opened the app on my phone and see in the hub manager it is set to 2.4ghz ON and 5 ghz ON and SMART channel 100. I will raise the issue with the Mitsubishi engineer service call soon. Many thanks.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

XRaySpeX — Sun, 28 Jan 2024 14:56:02 GMT

The label should be in the slider at the back.

Login to your EE SH/SR at http://192.168.1.254 with the admin password on the bottom of the slider label on the back of the router.

For the black EE Smart Hub, but not the white EE Smart Router, try separating the wireless bands/SSIDs. On the Advanced > Wireless Settings page of the SH there is a button near the top to Separate the Bands. Turn it ON. Then the 5GHz SSID will appear starting with "5GHz-" & the 2.4 GHz SSID not starting with "5GHz-". Then connect your devices to the 2.4 GHz SSID if they can't do 5GHz. The white Smart Router doesn't allow this.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

SusieP3 — Sun, 28 Jan 2024 15:20:45 GMT

Can you be more specific about "there is a button near the top to Separate the Bands"? I have looked at the Advanced > Wireless Settings of the Smart Hub and cannot see that button. Thanks for your continued help.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

XRaySpeX — Sun, 28 Jan 2024 19:15:39 GMT

Then I can't see it can be a Smart Hub. Post a pix of it.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

Neil-O — Mon, 29 Jan 2024 09:02:31 GMT

Hi @SusieP3 These are the steps you need to follow.

Open a web browser and click on the address bar

Enter 192.168.1.254 and go to the page

Click Advanced settings

Click Wireless

You can toggle the buttons Off and On underneath the 2.4GHz and 5GHz

Thanks

Neil

Re: Mitsubishi Ecodan air source heat pump wifi pairing

XRaySpeX — Mon, 29 Jan 2024 11:44:01 GMT

If it is the EE Smart Hub Plus, you cannot separate the wireless bands/SSIDs. The most you can do is on the Advanced > Advanced Wireless page to temporarily disable the 5 GHz band & move off the Smart channel while connecting problematic 2.4 GHz devices.

Re: Mitsubishi Ecodan air source heat pump wifi pairing

SusieP3 — Mon, 05 Feb 2024 17:10:41 GMT

Many thanks all, temporarily altered the settings on the Smart Hub Plus and it paired. Changed it back and the App still works. Result!