Smart Hub Pro - DMZ not routing when accessed internally.

Toliver182 — Tue, 04 Feb 2025 17:30:21 GMT

Setup described below.

All Cat 7 cable

ONT > Smart Hub Pro > TL-SX1008 (10GB 8 port switch) > PC with TP-Link TX401 ( 10GB NIC)

I have the PC setup with a static ip of 192.168.1.60

I have the DMZ selected at 192.168.1.60

I have also explicitly port forwarded ports 80,443 to 192.168.1.60

I have an external Cloudflare DDNS configured and managed by the PC (Not the router).

Lets assume my external domain is mydomain.com

I cannot access mydomain.com from inside my network on any other device, wifi or wired.

If i disable my wifi and go via mobile data i can access mydomain.com

I have also tested the following:

ONT > Smart Hub Pro > PC with TP-Link TX401 ( 10GB NIC) - No issue, this works

ONT > Smart Hub Pro > Smart Wifi Plus > PC with TP-Link TX401 ( 10GB NIC) - This does not work.

It appears the Smart Hub Pro struggles routing a DMZ via either a switch or Smart Wifi Plus.

Any suggestions? Is there a place where I can file an actual bug report?

topic Smart Hub Pro - DMZ not routing when accessed internally. in Broadband & Landline