4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile

george25x — Fri, 28 Mar 2025 21:35:30 GMT

The Archer MR600 router only supports IPv4 connection profile by default for EE.

I have create a new profile with PDP type as IPv4&IPv6, connected successfully, apparently EE assigns 2 public IPs, as per below IP test from a website:

Your IPv4 address on the public Internet appears to be 31.94.xx.44 Your IPv6 address on the public Internet appears to be 2a00:23ee:11b0:454b:1af5:xx:1407:f5ba

However if I try to access any site by IPv4, it fails:

$ ping 1.1.1.1 PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data. From 192.168.1.1 icmp_seq=1 Destination Net Unreachable From 192.168.1.1 icmp_seq=2 Destination Net Unreachable From 192.168.1.1 icmp_seq=3 Destination Net Unreachable $ ping -4 www.google.com PING www.google.com (216.58.212.228) 56(84) bytes of data. From _gateway (192.168.1.1) icmp_seq=62 Destination Net Unreachable

No issues via IPv6:

$ ping -6 www.google.com PING www.google.com (2a00:1450:4009:80b::2004) 56 data bytes 64 bytes from lhr35s04-in-x04.1e100.net (2a00:1450:4009:80b::2004): icmp_seq=1 ttl=56 time=46.7 ms

The router's IPv4 routing table is empty while on the IPv4-v6 profile:No static routes.

The same section is populated if I select the IPv4 only connection profile, and I can ping IPv4 sites by name and IP.

ID Network Destination Subnet Mask Gateway Interface -- -------------------- ----------------- --------------- ------------- 1 0.0.0.0 0.0.0.0 10.99.88.149 LTE 2 10.99.88.144 255.255.255.248 0.0.0.0 LTE 3 192.168.1.0 255.255.255.0 0.0.0.0 LAN & WLAN

Here is the new profile, which routes only IPv6 from the local network:

EE settings for IPv4 and v6

No IPv4 is assigned, but IPv6 is assigned, with the new profile.

The router says that connection failed, although I have internet.

Error on applying profile.

Router details: Firmware Version:‪1.1.0 0.9.1 v0001.0 Build 220727 Rel.74013n Hardware Version:‪Archer MR600 v3 00000002

Is there a bug in the firmware, or is there a setting that needs to be changed in the router?

Re: 4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile

XRaySpeX — Fri, 28 Mar 2025 22:50:23 GMT

@george25x wrote:

No IPv4 is assigned, but IPv6 is assigned, with the new profile.

In the L-hand rejected (cuz it shows MAC) image IPv4 needs an IPv4 DNS set.

Re: 4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile

george25x — Fri, 28 Mar 2025 23:01:57 GMT

I have contacted TP-Link support, I have downloaded the beta firmware below and created a connection profile with 464XLAT enabled.

https://static.tp-link.com/upload/beta/2023/202308/20230815/Archer_MR600(EU)_V3_1.1.0_230811.zip

I can now use both IPv4 and IPv6. IPv4 is routed to the internet.

topic Re: 4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile in Mobile Broadband

4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile

Re: 4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile

Re: 4G LTE router - MR600 - cannot route IPv4 from local net on IPv4+IPv6 profile